Digi One® IA

Ethernet enable any industrial serial device

Overview
Models
Specs
Documentation
Learn More

See larger view

Modbus serial to Modbus/TCP protocol conversion
TCP/UDP Socket Services for broad device connectivity
1 RS-232/422/485 switch selectable serial port
Industrial protocol support
Product datasheet

The Digi One IA serial server provides reliable, cost-effective network connectivity for virtually any serial device. This unobtrusive and easy-to-use device server delivers serial-to-Ethernet connectivity to Programmable Logic Controllers (PLCs), Remote Terminal Units (RTUs), process and quality equipment, bar-code readers and other industrial devices.

Digi One IA supports most industrial automation protocols through TCP/UDP connections, serial bridging or COM port redirection using Digi’s patented RealPort® software. RealPort enables existing applications to communicate, without modification, with serial devices over the Ethernet. By creating a Modbus bridge, multiple Modbus/TCP masters can share Modbus serial slaves, or Modbus serial masters can access Modbus/TCP slaves.

Digi One IA serial servers are easy to install locally or remotely. The IP address can be configured using DHCP, ARP-Ping or Setup, an application included with the installation CD that automatically detects Digi One devices on the network. Using the web interface, users can configure advanced functions into their application.

	North America:	International:
Digi One IA View details	70001862 Service agreement	70001862	Contact Us

	North America:	International:
Digi One IA View details	70001862 Service agreement	70001862	Contact Us

Specifications	Digi One® IA
Features
Management	HTTP configuration, Digi Port Authority – Remote management diagnostics and auto-discovery tool
Protocols	Telnet, Reverse Telnet and extended Telnet RFC 2217; TCP/UDP Socket Services; UDP, support 32 concurrent socket connections; DHCP/RARP, ARP-Ping; Modbus ASCII/RTU to Modbus TCP conversion; Modbus Ethernet-to-Serial Bridge Function supporting Modbus/TCP, Modbus/UDP, Modbus/RTU, Modbus/ASCII; Modbus bridge supports TCP and UDP Encapsulation of Modbus/RTU, Modbus/ASCII
Software	Patented RealPort for COM/TTY ports
Operating Systems	AIX, HP-UX, Linux®, SCO® OpenServer™ 5, SCO® OpenServer™ 6, Solaris™ Intel, Solaris™ SPARC, Windows XP®, Windows Server® 2003, Windows Server® 2008, Windows Vista®
Status LEDs	Serial signals, Power, Ethernet, Diagnostics
Dimensions (L x W x D)	4.70 in x 0.90 in x 4.0 in (12.00 cm x 2.30 cm x 10.10 cm)
Weight	2.25 oz (64.00 g)
Other	Full modem and hardware flow control, Flash upgradeable firmware, 35 mm DIN rail mounting
Interfaces
Serial Ports	1 RS-232/422/485 (switch selectable)
Serial Connector	DB-9M or screw terminal connectors
Serial Throughput	Up to 230 Kbps
Ethernet Physical Layer	10/100Base-T
Power Requirements
Power Input	9-30 VDC @ .5 Amps max
Power Connector	Screw terminal block power jack for external supply
Surge Protection	2 kV isolation between power supply and serial ground product
Environmental
Operating Temperature	0º C to 60º C (32º F to 140º F)
Relative Humidity	5% to 90% (non-condensing)
Ethernet Isolation	1500 VAC min per IEEE 802.3/ANSI X3.263
Serial Port Protection (ESD)	+15 kV air GAP and +8 Kv contact discharge per IEC 1000-4-2
Regulatory Approvals
Safety	UL 60950, UL1604 (Class 1 Div 2), EN60950, CAN/CSA C22.2 No.60950
Emissions/Immunity	FCC Part 15 Subpart B (Class A), EN55024, EN55022 (Class A), EN61000-6-2